In October, a homeowner in Annapolis called us because their Bosch dishwasher kept stopping partway through a cycle with E:23 on the display. A dishwasher that quits mid-load is annoying any week. The week of Thanksgiving, with a sink full of roasting pans, it’s a real problem.
This post walks through that job: what the code means, what you can safely check yourself, what we found and what it cost. It comes from our own job record, so the details are real. We’ve left out anything that could identify the household.
What E:23 means on a Bosch dishwasher
Bosch’s support page says an E:23 code indicates an issue with the drain pump: the pump is blocked, clogged or faulty.
Two neighboring codes are easy to mix up with it:
- E:24 usually means the dishwasher can’t drain because something is in the way: a blocked filter, a kinked hose or, after a new garbage disposal goes in, a knockout plug the installer didn’t remove.
- E:25 means the drain pump is blocked or its cover is loose or missing.
Bosch’s error code guide gives owners cleaning steps for E:24 and E:25. For E:23 it simply says to contact support. That’s a fair hint that the pump itself may need testing.
Two safe checks before you call
Turn the dishwasher off at the breaker, or unplug it, before you reach into the tub.
- Clean the filter. On most Bosch models it twists out of the floor of the tub. Wash it under running water with a little mild soap and a soft brush, then lock it back in place.
- Look at the pump cover under the filter. Bosch’s own instructions have owners pry the small pump cover off with a spoon, then sponge out any debris and standing water. Go slowly, because broken glass tends to end up here. If you’re not comfortable doing this, skip it.
Then reset the dishwasher the way your manual describes and run a short cycle. If E:23 comes back with a clean filter and a clear pump area, the pump needs to be tested.
For drain trouble that isn’t about the pump, like a sink that backs up, an air gap that spills or a pinched hose under the sink, see our guide to standing water in a dishwasher.
What we found on this Annapolis Bosch
The dishwasher was a Bosch, model SHV68TL3UC. Testing showed the drain pump itself had failed, so no amount of cleaning or resetting was going to keep the code away. We ordered a replacement pump matched to that model, installed it and checked that the dishwasher drained properly.
On the bill:
- Drain pump: about $140
- Labor: $195
- No separate charge for the diagnostic visit
That came to about $335 for parts and labor.
What a drain pump repair costs: our 2026 jobs
We looked at every dishwasher drain pump we replaced this year where the pump was the only part. The totals ran from about $280 to $410. Labor was usually $195. Most of the difference came from the pump itself, which ran from about $100 to $200 depending on the brand and model.
Some jobs cost more because the pump wasn’t the only problem. In our records, that meant a new drain hose, a tub gasket and water valve, or in one case a control board, replaced at the same time. That’s why we test before quoting instead of guessing from the code.
For more on how repair prices come together, see what affects appliance repair costs in Annapolis. Our diagnostic visit is $89, credited toward the repair if you go ahead, and repairs come with a 90-day parts and 30-day workmanship warranty.
Getting your dishwasher ready for Thanksgiving
A few habits help a dishwasher get through the busiest cooking day of the year:
- Clean the filter a few days ahead, not on Thanksgiving morning. If something’s wrong, you’ll find out with time to fix it.
- Run the garbage disposal before you start the dishwasher if they share a drain, so the dishwasher isn’t pumping into a clogged line.
- Keep bones, skin and big scraps out. Turkey and cranberry bits are exactly the kind of debris that ends up at the filter and pump.
- Load roasting pans and platters so the spray arms can turn. A big pan laid flat over the filter can trap water and food.
- If it stops with a code, don’t keep restarting it. Check the filter, then call. Restarting won’t fix a failed pump.
If a code shows up the week of Thanksgiving, call early. Same-day visits may be available when our schedule allows, but some repairs need a part ordered, as this one did.
Bosch dishwasher repair in Annapolis
Elite Appliance Repair fixes Bosch dishwashers in Annapolis and across Anne Arundel and Prince George’s Counties. Our Bosch appliance repair and dishwasher repair pages cover what we work on.
Through November 25, kitchen repairs of $250 or more are $50 off with code THANKS50. See current offers.
Book online or call 240-484-0269.
Will resetting the dishwasher clear E:23?
A reset may clear the display, but it won’t fix a blocked or failed pump. If the code comes back, the pump needs testing.
Is a new drain pump worth it on an older dishwasher?
Often it is. In our 2026 jobs, a pump-only repair came to about $280 to $410. If we find other problems that make a repair poor value, we’ll tell you before any work starts.
